Solar House Number Light – Self-Charging, No Wiring

Integrated Solar Charging
The solar panel is built into the face of the number — it charges in daylight and needs no wiring, no separate panel, and no electrician. A 4–6 hour charge runs the light 8–10 hours overnight.

Automatic Dusk-to-Dawn Lighting
A built-in light sensor turns the backlight on at sunset and off at sunrise on its own. No app, no switch, no timer to set.

Three LED Colors on a Remote
Switch between warm white, neutral, and cool white with the included remote, and dim to the brightness you want.

Stainless Steel and Acrylic Build
Stainless steel body with an acrylic backing that creates a clean halo glow against the wall — the same construction as our custom illuminated numbers, not molded plastic.

WeatherproofSealed against rain, snow, dust, and UV for year-round outdoor use.

Floating Backlit Effect
Included spacers mount each number slightly off the wall, so the light wraps behind it for a floating glow at night.

Ready to Install
Ships with a paper drilling template, threaded mounting studs, and spacers. Tape, drill the marked holes, screw in, and mount — about 30 minutes, no wiring.

Size
8 inches in height (single number). One fixed size.

Finish
Matte black. One fixed finish.

Font
Oblivion. One fixed font.

Construction
Each number is built in four layers: a solar panel face that charges in daylight, a stainless steel body, an internal LED strip with rechargeable battery and dusk-to-dawn sensor, and an acrylic backing that diffuses the light into a clean halo glow.

Lighting
Three LED colors — warm white, neutral, and cool white — selectable by the included remote, and dimmable.

Power
Solar only. No wiring, no plug, no USB. A 4–6 hour charge runs the light 8–10 hours overnight.

Weather Rating: Weatherproof.

In the Box
One solar house number, remote, paper drilling template, threaded mounting studs, and floating-effect spacers.

Each number installs in about 30 minutes with just a drill. No wiring or power source to plan — every number is self-contained.

Position the template — Tape the included paper template to your wall where you want the number.
Drill the marked holes — Drill at the pre-marked points on the template. Works on wood, brick, stucco, metal, and stone.
Set the studs — Insert the threaded mounting studs into the drilled holes.
Add the spacers — Slide the included spacers onto the studs to create the floating backlit gap.
Mount the number — Secure the number onto the studs. Repeat for each digit in your address.